Service Schedules; Introduction; How To Use The Service Schedules; Calendar Equivalents - jcb RTFL 926 Operator's Manual

Introduction

!M
WARNING
Maintenance must be done only by suitably qualified
and competent persons.
Before doing any maintenance make sure the machine
is safe, it should be correctly parked on level ground.
To prevent anyone starting the engine, remove the
starter key. Disconnect the battery when you are not
using electrical power.
precautions you could be killed or injured.
8-3-1-1
A badly maintained machine is a danger to the operator
and the people working around him. Make sure that the
regular maintenance and lubrication jobs listed in the
service schedules are done to keep the machine in a safe
and efficient working condition.
Apart from the daily jobs, the schedules are based on
machine running hours. Keep a regular check on the
hourmeter readings to correctly gauge service intervals.
When there is no hourmeter fitted, use the calendar
equivalents to determine the service intervals. Refer to
Calendar Equivalents. Do not use a machine which is
due for a service. Make sure any defects found during the
regular maintenance checks are rectified immediately.
93

Service Schedules

T3-036_3
If you do not take these

How to Use the Service Schedules

In the example shown, A shows all service requirements to
be carried out every 10 hours and B shows the
requirements to be carried out every 500 hours.
Important: Services should be carried out at either the
hourly interval or calendar interval, whichever occurs first.
Refer to Calendar Equivalents.
Important: The intervals given in the schedules must not
be exceeded. If the machine is operated under severe
conditions (high temperature, dust, water, etc.), shorten
the intervals.

Calendar Equivalents

Every 10 Hours = Daily
Every 50 Hours = Weekly
Every 500 Hours = Six Months
Every 1000 Hours = Yearly
Every 2000 Hours = 2 Years
Every 6000 Hours = 6 Years
9811/5700-7
Routine Maintenance
Service Schedules
T3-012_4
795390-1
T3-051
93