jcb RTFL 926 Operator's Manual page 154

Changing the Water Separator Pre Filter
1 Get access to the Water Separator and Engine Fuel
Filter. Refer to Water Separator and Engine Fuel
Filter, Introduction.
2 Drain and remove the water separator bowl C.
K Draining the Water Separator and Engine Fuel
Filter ( T
143).
3 To remove the filter element A, release locking ring B
and discard element.
4 Fit new element and secure in position with locking
ring B.
5 Refit water separator bowl. Secure in position with
K Draining the Water Separator and
locking ring B.
Engine Fuel Filter ( T
6 Make sure that the fuel electrical connector E is
K Fig 109. ( T 144)
correctly fitted.
Fig 109.
144
143).
9811/5700-7
Routine Maintenance
Fuel System
144