jcb RTFL 926 Operator's Manual page 47

Beacon
Two position rocker switch. The switch
functions operate when the starter switch
is in the ON and OFF positions.
Position 1: OFF
Position 2: ON
339711-1
Before you operate the switch, refer to Beacon.
!M
WARNING
Do not drive on the road with the work lights switched
on. You can interfere with other drivers visibility and
cause an accident.
2-2-2-5_1
Front Work Lights
Two position rocker switch. The switch
functions operate when the starter switch
is in the ON position.
Position 1: OFF
Position 2: Outer Work Lights ON
340100-1
Note: The work lights work independently of the main
lights circuit.
Rear Fog Light (if fitted)
Two position rocker switch. The switch
functions operate when the starter switch
is in the ON position.
Position 1: OFF
Position 2: ON
340051-1
Cab Heater (if fitted)
Three position push switch. The switch
functions operate when the starter switch
is in the ON position.
Position 1: OFF
Position 3: ON - 1st Speed
339681-1
Position 2: ON - 2nd Speed (if fitted)
Before you operate the switch, refer to Air-
Conditioning and Cab Heater Controls.
37
Drive Controls, Switches and Instruments
Air-Conditioning (if fitted)
Two position rocker switch. The switch
functions operate when the starter switch
is in the ON position.
Position 1: OFF
Position 2: ON
339681-1
Before you operate the switch, refer to Air-
Conditioning and Cab Heater Controls.
9811/5700-7
Operation
37