Document Stored In Memory - Canon PIXMA MX850 Series Quick Start Manual

Canon all in one printer quick start guide
Hide thumbs Also See for PIXMA MX850 Series:
Table of Contents

Advertisement

Document Stored in Memory

In the following cases, the machine is not able to print the received fax and will automatically store
the fax in its memory:
Ink has run out while receiving a fax.
Paper has run out while receiving a fax.
Paper other than A4, Letter, or Legal-sized paper is loaded.
OFF is selected for Auto print received.
You pressed the Stop/Reset button to cancel printing of a received fax.
Important
If you disconnect the power cord, all the documents stored in memory are deleted. Send or print
necessary documents before disconnecting the power cord.
Note
When confirming, printing, or deleting a document stored in memory, you specify it by its transaction
number. If you do not know the transaction number for your target document, print the list of documents
first.
Printing a Document in Memory
If the machine was not able to send a fax, or if the machine was not able to print a received fax,
the machine stores the unsent or unprinted fax in its memory. If an error occurred when sending
a fax, they are not stored. You can print a list of stored documents (the memory list) or print a
specified document.
Note
The memory list shows the transaction number of the unsent or unprinted fax (TX/RX NO.),
transaction mode, recipient's number, and the date and time of the transaction.
1
Load paper.
See "Loading Printing Paper" on page 20.
2
Display the FAX menu screen.
(1) Press the FAX button, then press the Menu button.
The FAX menu screen is displayed.
3
Display the Memory reference screen.
(1) Use the [ or ] button to select Memory reference, then press the OK button.
The Memory reference screen is displayed.
Faxing
99

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents