Canon PIXMA MX850 Series Quick Start Manual page 59

Trimming Setting
You can select an area to print.
Setting on the Machine
This section describes the PictBridge print settings on the machine.
Set the print settings to Default on the PictBridge compliant device when you want to print
according to the settings on the machine.
Displaying the PictBridge Settings Screen and Specifying the Settings
Note
When a PictBridge compliant device is connected to the machine, the PictBridge settings screen
can also be displayed by pressing the Settings button.
(1) Turn on the machine.
(2) Press the Menu button.
(3) Press the [ or ] button to select Maintenance/settings, then press the OK button.
(4) Press the [ or ] button to select Device settings, then press the OK button.
(5) Press the { or } button to select PictBridge settings, then press the OK button.
(6) Use the {, }, [, or ] button to select the tab.
(7) Use the { or } button to select the item to set.
(8) Use the [ or ] button to change the setting.
(9) Repeat steps (6) to (8) to specify the setting.
(10) After finishing all settings you need, press the OK button.
Printing Photographs Directly from a PictBridge Compliant Device 55