Canon PIXMA MX850 Series Quick Start Manual page 162

Cause
Your machine is not selected in Printer
on the Print dialog box.
Error Number: 1700 Is Displayed
Cause
The ink absorber is almost full.
Error Number: 1851 Is Displayed
Cause
Inner Cover was open when you
started printing.
Error Number: 1856 Is Displayed
Cause
Inner Cover was opened while printing
was in progress.
Error Number: 2001 Is Displayed
Cause
No response from connected digital
camera or video camcorder. /
Connected digital camera or video
camcorder is not compatible with this
machine.
Error Number: 2002 Is Displayed
Cause
A USB hub is connected.
158 Troubleshooting
Select your machine's name in Printer on the Print dialog box.
If your machine's name does not appear in Printer, follow the procedure below
to check that the driver for your machine is installed to your computer.
(1)Select Print & Fax Preferences from Printer.
In Mac OS X v.10.3.9, select Edit Printer List from Printer.
(2)Check that your machine's name is displayed in the list of printers and that
the check box is selected.
(3)If your machine's name is not displayed, click Add(+) to add the machine.
If you cannot add the machine, follow the procedure described in your setup
sheet or the Network Setup Guide to reinstall the MP Drivers.
See ""The ink absorber is almost full. Press OK to continue printing. Contact the
service center."" on page 134.
Close the Inner Cover, then press the OK button on the machine. Printing will
start again.
Close the Inner Cover, then press the OK button on the machine.
The print data being sent at the time of the error will be erased, so print it again.
See ""Incompatible device detected. Remove the device."" on page 135.
See ""An unsupported USB hub is connected. Remove the hub."" on page 135.
Action
Action
Action
Action
Action
Action