Advertisement
•
Press and hold Sanremo logo (continuous) button on group 1 (left most group) until 'HEATING CUP' is read on pressure display.
•
If continuous button is released when display reads 'DOSES SETTING SELECT DOSE IN 30 S',
programming will be overwritten. Please wait for volumetric programming to time out after 30 seconds (Doses setting message will
disappear from pressure display) and re-try holding the continuous button to enter programming menu.
Cup warmer settings
Group flush notification to
maintain optimal extraction
temperature
Long dose buttons to change category
Continuous (Sanremo logo) button to enter categories / store values
Individual Group Cleaning Mode
PRESS
Accessing Programming Menu
Programming Menu Options
Barista lights (if equipped)
Date/time settings & auto
on/off settings
Navigating Programming
HOLD
Eco modes & settings
Fine tune group recipes
Machine counters
*NOTE* Once started, it
Short dose buttons will light up when category is
selected. These are used to change category values.
DO NOT
press group buttons or volumetric
Deep clean all groups.
cannot be interrupted.
Pre-brew settings
Exit programing
Advertisement
