Install The System Hardware; Install The Disk Drive In The Tray - Qsan XCubeNAS XN8012R Owner's Manual

3.

Install the System Hardware

This chapter will show you the procedure of XN8012R hardware installation and initial
configuration.
3.1.

Install the Disk Drive in the Tray

3.1.1. Tools and Parts for Drive Installation
A screwdriver (Phillips #1).
At least one 3.5" or 2.5" SATA drive (please visit www.qsan.com for compatible drive
models).
3.1.2. LFF Disk Drive Description
Table 3-1
Item Number
1
2
3
10
© Copyright 2018 QSAN Technology, Inc. All Rights Reserved.
CAUTION:
Please ensure that there is no data on the disk to prevent important data
being formatted.
Front Side Components of LFF & SFF Disk Drive Trays
Description
Release Button
Disk Drive Lock
Carrier Handle