Qsan XCubeNAS XN8012R Owner's Manual page 20

2. Install a 3.5'' HDD into an LFF tray.
Place the drive on the tray.
Secure the drive from the four spots indicate below with four #6-32 screws provided
in the accessory box.
3. Install a 2.5'' SSD into an LFF tray.
Place the drive in the blue area (shown below) of the tray.
Turn the tray upside down and secure the drive from the bottom of the tray with four
M3 screws provided in the accessory box.
12
© Copyright 2018 QSAN Technology, Inc. All Rights Reserved.