Table of Contents
Advertisement
8
Unit Identification (UID)
LED (rear panel)
9
NVMe Solid State Drive
(SSD) System LED
10
SATA Solid State Drive
(SSD) System LED
11
PSU LED
Light ON: Connected to the internet
Light flashes: when data is being accessed.
Speed:
Light OFF: Speed less than 10Mbps
Light ON: Connected to the internet
Blue: the system has been identified.
Off: the system has not been identified.
Blue: The SSD is attached.
Blue
flashes: The disk data is being
accessed.
Amber: A hard drive read/write error occurs.
Blue
and
Amber
flashes alternatively: The
hard disk is being rebuilt or identify a
specific disk drive.
Blue: The SSD is attached.
Blue
flashes: The disk data is being
accessed.
Amber: A hard drive read/write error occurs.
Blue
and
Amber
flashes alternatively: The
hard disk is being rebuilt or identify a
specific disk drive.
OFF: No AC power to power supplies / AC
present (only 5VSB on, PS off).
Green: PSU is on and OK.
Amber: Power supply failure for main
output.
43
Advertisement
Table of Contents
