Qsan XCubeNAS XN8012R Owner's Manual page 22

3.1.4. Install the Disk Drive (SFF)
1. Remove the SFF tray from the system.
Hold down the release button and pull out the disk drive tray from the XCubeNAS.
2. Install a 2.5'' SSD into a SFF tray
Place the SSD in the drive tray.
Turn the tray upside down and secure the drive from the bottom of the tray with four
M3 screws provided in the accessory box.
14
© Copyright 2018 QSAN Technology, Inc. All Rights Reserved.