Table of Contents
Advertisement
3.
Insert a new memory module into the slot.
Push the retaining clips on the slot out to the sides.
Align the notch on the gold edge of the module with the notch in the memory slot.
Push down on the memory module with firm and even pressure. The retaining clips
will snap into position as the module is correctly inserted.
16
© Copyright 2018 QSAN Technology, Inc. All Rights Reserved.
CAUTION:
When you remove the rear top cover, the sensitive internal components
are exposed. Please avoid touching anything other than the memory
module when you add or remove a memory module.
Advertisement
Table of Contents
