Table of Contents
Advertisement
29
4.1 UL seal
4.2 CE seal
4.2.1
Declaration of conformity
SAFETY:
ELECTROMAGNETIC COMPATIBILITY:
(24/29) - Appendix - Installation/Operation - 10i / 20i - V0703
See "UL seal" page 12.
Warning
Before starting up the DRO, carefully read the instructions of Chapter 2 in
the Installation Manual.
The DRO must not be powered-on until verifying that the machine complies
with the "89/392/CEE" Directive.
Manufacturer:
Fagor Automation, S. Coop.
Barrio de San Andrés 19, C.P. 20500, Mondragón -Guipúzcoa (ESPAÑA)
We hereby declare, under our responsibility that the product:
Fagor Digital Readout:
meets the following directives:
EN 60204-1Machine safety. Electrical equipment of the machines
EN 61000-6-4 Emission
EN 55011
Radiated. Class A, Group 1.
EN 55011
Conducted. Class A, Group 1.
EN 61000-3-2 Harmonics
EN 61000-3-3 Flickers.
EN 61000-6-2 Immunity
EN 61000-4-2 Electrostatic discharges.
EN 61000-4-3 Radiofrequency Radiated Electromagnetic Fields.
EN 61000-4-4 Bursts and fast transients.
EN 61000-4-5 Shockwaves
EN 61000-4-6 Conducted disturbance induced by radio frequency fields.
EN 61000-4-8 Magnetic fields at mains frequency
EN 61000-4-11 Voltage fluctuations and Outages.
ENV 50204
Electromagnetic fields radiated by wireless telephones.
As instructed by the European Community Directives on Low Voltage:
73/23/EEC, (and the 93/68/EEC amendment) on Machine Safety 89/392/EEC
and 89/336/EEC on Electromagnetic Compatibility.
In Mondragón, April 1st, 2005
10i, 10i-B, 20i, 20i-B
4 Appendix
Advertisement
Table of Contents
