Taking A Reading - Elcometer 456 Operating Instructions Manual

3 TAKING A READING

3.1 BEFORE YOU START
Have you calibrated the gauge?........ see page 8 of these instructions.
Do you require statistics? .................. press STATS.
Do you want to save readings? ......... press DATA.
Have you selected units (µm, etc)? ... press MENU>SETUP>UNITS.
3.2 PROCEDURE
1. Switch on the gauge.
2. Hold the probe and press firmly against the surface you are
measuring. The reading may be inaccurate if the probe is not
held flat against the surface.
3. Read the depth shown on the display.
R
5