Producing Reports Using Elcomaster - Elcometer 456 Operating Instructions Manual

Duct deposit measuring system

Hide thumbs Also See for 456:

Table of Contents

7.2 CABLE CONNECTION

1. Connect your gauge to your PC using the optional PC connection cable. Connect the cable between

the interface on the side of the gauge and an RS232 interface on your PC.

2. Switch on your gauge and ensure the Reading Screen is displayed.

3. Start ElcoMaster™ and follow the instructions included with the software.

7.3 BLUETOOTH

CONNECTION

Full instructions on how to interface your gauge with ElcoMaster™ and download data are included in the

ElcoMaster™ help file supplied with the software.

8 PRODUCING REPORTS USING ELCOMASTER

The ElcoMaster™ software included with your Elcometer 456 gauge includes a report designed specifically

for duct deposit measurements. Follow the steps listed below to download readings from the gauge to

ElcoMaster and then output the report to a printer, a file or to email. Further information can be found in the

instructions provided with your gauge and the help file contained within ElcoMaster™.

8.1 DOWNLOAD READINGS DATA FROM GAUGE MEMORY

Before you start, interface and add your gauge to ElcoMaster™ - refer to the instructions included with

ElcoMaster™ software.

1. Ensure your gauge is connected - refer to the following screenshot.

2. Click on the batch or batches you want to download (hold down the Ctrl key to select multiple batches).

3. Click on the Download button.

Table of Contents