About This Equipment - Elcometer 456 Operating Instructions Manual

R
Thank you for your purchase of this Elcometer 456 Duct Deposit Measuring System. Welcome to
Elcometer.
Elcometer are world leaders in the design, manufacture and supply of coatings inspection equipment. Our
products cover all aspects of coating inspection, from development through application to post application
inspection.
The Elcometer 456 Duct Deposit Measuring System is a world beating product. With the purchase of this
product you now have access to the worldwide service and support network of Elcometer. For more
information visit our website at www.elcometer.com.

1 ABOUT THIS EQUIPMENT

The Elcometer 456 Duct Deposit Measuring System is designed for measurement of the thickness of dust
and grease deposits within ventilation systems and kitchen ducts made of ferrous metals.
Use the template supplied to help you take readings of deposit thickness over the test area and then save
your measurements in the gauge memory. When you have finished testing, download your measurements
®
to a PC via Bluetooth or cable and then produce a professional survey report using the pre-designed
reports in ElcoMaster software. This is the DTT (Deposit Thickness Test) in HVCA guide TR/19.
To maximise the benefits of your new Elcometer 456 Duct Deposit Measuring System, please take
some time to read these Operating Instructions and the separate instruction manual for the
Elcometer 456 gauge. Do not hesitate to contact Elcometer or your Elcometer supplier if you have
any questions.
2