Cleaning The Lint Trap - Hanseatic HWMB814C User Manual

Page EN-30 Care and maintenance

Cleaning the lint trap

CAUTION!
Risk of scalding!
Improper handling of the appliance
can lead to scalding caused by hot suds.
■ Leave the suds to cool before drai-
ning them.
NOTICE
Risk of damage!
If the emergency/residual water is emp-
tied, a quantity of water will fl ow out.
■ Use an adequately large collection
container.
The lint trap stops threads and other foreign
bodies ending up in the pump with the suds.
Clean the lint trap every 30 wash cycles.
1. Switch off the appliance.
2. Close the tap.
3. Open the shutter of the lint trap (17) with a
flat object.
4. Lock the lint trap in place by turning it anti-
clockwise.
5. Remove the foreign body and clean the
lint trap thoroughly under running water.
6. Replace the lint trap and turn it clockwise
until it clicks into place.
7. Insert the shutter (17) in such a way that
the opening is pointing upwards and press
it down firmly.
(17)