Exposuretime - Toshiba teli BU602M Instruction Manual

ExposureTime

ExposureTime controls the duration where the image sensor is exposed to light.
This camera series provides three kinds of exposure time control mode.
- NoSpecify : The exposure time is determined by 'AcquisitionFrameRate' register setting value
- Manual : The exposure time is determined by 'ExposureTime' register setting value.
- Auto : The exposure time is adjusted automatically.
● GenICam Node
Name
ExposureTime
ExposureAuto
● IIDC2 Register
Register Field
ExposureTime Implemented
Control
Mult
Div
Min
Max
Value
Copyright © 2018 – 2019 Toshiba Teli Corporation, All rights reserved.
Length
Interface
Byte / [bit]
IFloat 4
IEnumeration 4
Length
Address
Byte / [bit]
0x204020 [31]
0x204028 4
0x20402C 4
0x204030 4
0x204034 4
0x204038 4
0x20403C 4
83 / 158
Access
R/W Sets an exposure time.
R/W Selects exposure time control mode.
Access
R Returns the state whether the function is implemented.
R/W [0]: NoSpecify
[1]: Manual
[2]: Auto
R
Absolute Value [sec] = Raw * (Mult / Div)
R
R Returns the minimum value of ExposureTime Value register.
R Returns the maximum value of ExposureTime Value register.
R/W Sets Time value. (Raw value)
Description
Description
D4285844D
http://www.toshiba-teli.co.jp/en/