Toshiba teli BU602M Instruction Manual page 64

● IIDC2 Register
Register
AcquisitionMode Implemented
ListOfElements
AcquisitionFrameCount Implemented
AcquisitionFrameRate Implemented
AcquisitionFrameInterval Implemented
Copyright © 2018 – 2019 Toshiba Teli Corporation, All rights reserved.
Field Address
Byte / [bit]
0x203020
0x20302C
~0x203038
Value 0x20303C
0x203040
Min 0x203054
Max 0x203058
Value 0x20305C
0x2030A0
Control 0x2030A8
Mult 0x2030AC
Div 0x2030B0
Min 0x2030B4
Max 0x2030B8
Value 0x2030BC
0x2030C0
Control 0x2030C8
Mult 0x2030CC
Div 0x2030D0
Min 0x2030D4
Max 0x2030D8
Value 0x2030DC
Length
Access
[31] R Returns the state whether the function is implemented.
16 R [0]: Abort
[1]: Stop
[8]: Continuous
[9]: MultiFrame
[10]: Image Buffer Read
4 R/W Selects an Acquisition mode.
[31] R Returns the state whether the function is implemented.
4 R Returns the minimum number of frames in
MultiFrame/ImageBuffer mode.
4 R Returns the maximum number of frames in
MultiFrame/ImageBuffer mode.
4 R/W Sets the number of frames in MultiFrame/ImageBuffer mode.
[31] R Returns the state whether the function is implemented.
4 R/W [0] : NoSpecify
[1] : Manual
4 R
Absolute Value [fps] = Raw * (Mult / Div)
4 R
4 R Returns the minimum value of frame rate.
4 R Returns the maximum value of frame rate.
4 R/W Sets frame rate of image stream in raw value.
[31] R Returns the state whether the function is implemented.
4 R/W [0] : NoSpecify
[1] : Manual
4 R
AbsoluteValue[sec] = Raw * (Mult / Div)
4 R
4 R Returns the minimum value of frame interval.
4 R Returns the maximum value of frame interval.
4 R/W Sets frame interval of image stream in raw value.
63 / 158
Description
D4285844D
http://www.toshiba-teli.co.jp/en/