General Specifications - Toshiba teli BU602M Instruction Manual

General Specifications

Model Name
Imager
Number of Video out pixels (H) × (V)
Optical Size
Scanning area (H) × (V)[mm]
Pixel size (H) × (V)[μm]
Scan method
Electronic shutter method
Aspect ratio
Sensitivity
Minimum illuminance (*1)
Power supply
Power consumption (*2)
Interface
Transmission speed
Protocol
Image format
Maximum Frame rate (*2)
Mono8
Mono10, Mono12
Dimensions
Mass
Lens mount
Flange back
Camera body grounding: insulation
status
*1 F1.4, Gain +24dB, Video Level 50%
*2 at the all pixel readout
Copyright © 2018 – 2019 Toshiba Teli Corporation, All rights reserved.
CMOS image sensor
Rolling shutter
2100lx, F5.6, 1/62.5s
DC +5V5% (from USB connector)
2.4W (maximum)
USB 3.0 (Only SuperSpeed is supported)
5Gbps (maximum)
Mono8, Mono10, Mono12
29 mm(W) x 29 mm (H) x 16 mm (D) (Not including protrusion)
Approximately 33g
Conductive between circuit GND and camera body
18 / 158
BU602M
3072 x 2048
type1/1.8
7.37 x 4.91
2.4 × 2.4
Progressive
3 : 2
5lx
USB3 Vision
60 fps
30 fps
C-mount
17.526mm
http://www.toshiba-teli.co.jp/en/
D4285844D