Imagebuffer - Toshiba teli BU602M Instruction Manual

ImageBuffer

In ImageBuffer mode, Camera stores images temporarily in image buffer, and read them out in arbitrary
timing.
This function is typically used in Random Trigger Shutter mode.
Please refer to TriggerControl section as well.
Exposure
Exposure1
Image Buffer
Image Streaming
on Interface Bus
● GenICam Node
Name
ImageBufferMode
ImageBufferFrameCount
ImageBufferRead
● IIDC2 Register
Register
ImageBufferMode Implemented
ListOfElements
ImageBufferFrameCount Implemented
Copyright © 2018 – 2019 Toshiba Teli Corporation, All rights reserved.
Exposure3
Exposure2
Frame2
Frame1 Frame1
Length
Interface
Byte / [bit]
IEnumeration 4
IInteger 4
ICommand 4
Length
Field Address
Byte / [bit]
0x203060
0x20306C
~0x203078
Value 0x20307C
0x203080
Min 0x203094
Max 0x203098
Value 0x20309C
Frame3
Frame2
Frame1
Frame1
Image Buffer
Access
R/W Selects an Image Buffer mode.
R/W Sets the number of frames to transfer in MultiFrame/ImageBuffer mode.
W Read Image from Image Buffer
Access
[31] R Returns the state whether the function is implemented.
16 R [0] : Off
[1] : On
4 R/W Sets an Image Buffer mode.
[31] R Returns the state whether the function is implemented.
4 R Returns the minimum number of frames in Image Buffer mode.
4 R Returns the maximum number of frames in Image Buffer mode.
4 R Returns the number of frames in Image Buffer mode.
68 / 158
Frame3
Frame2 Frame3
Frame2
Description
Description
D4285844D
http://www.toshiba-teli.co.jp/en/
Frame3