Toshiba teli BU602M Instruction Manual page 83

 Minimum/Maximum Value
● Note
In SoftwareTrigger operation, the delay time from 'TriggerSoftware' to exposure is not guaranteed.
BU series have different hardware trigger source.
Please refer to 'I/O Specification' section as well.
TriggerDelay is applied to both of HardwareTrigger and SoftwareTrigger.
TriggerAdditionalParameter is only effective in Bulk mode.
Copyright © 2018 – 2019 Toshiba Teli Corporation, All rights reserved.
TriggerAdditional
Parameter
Minimum
Maximum
Initial Value
TriggerDelay
Minimum
Maximum
Initial Value
Formula
TriggerSource
Line0 (*) I/O connector : 4 pin, High level 2.0 to 24.0V
Line2 I/O connector : 1 pin, High level 4.0 to 5.0V
Raw Value =
Absolute (Float) Value
0
255
0
Raw Value Absolute (Float) Value
0
120000000 2000000.0 [us]
0
Absolute Value [us] = Raw Value / 60
Description
* initial factory setting
82 / 158
0.0 [us]
0.0 [us]
http://www.toshiba-teli.co.jp/en/
D4285844D