Exposuretime - Toshiba teli BU030 Instruction Manual

ExposureTime

BU series are able to adjust exposure time by using electric shutter control.
BU USB series provide two kinds of exposure time control mode.
- Manual
- NoSpecify
● Registers
Register Visibility
ExposureTimeControl Beginner
ExposureTime Beginner
● Setting
- Select exposure time control mode
Set the "ExposureTimeControl" register to "Manual".
Set the following value to "ExposureTime" register. Setting value is Float type.
AcquisitionFrameRateControl
NoSpecify
Manual (*)
Register
ExposureTime (*)
ExposureTimeMin
ExposureTimeMax
● Note
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
: The exposure time is determined by "ExposureTime" register setting value.
: The exposure time is determined by "AcquisitionFrameRate" register setting value
Access
R/W Selects exposure time control mode.
R/W Sets absolute exposure time.
The frame rate is determined by giving priority to AcquisitionFrameRate setting value.
The frame rate is determined by giving priority to ExposureTime setting value.
BU030
8000 [μs]
10 [μs]
Register
ExposureTime (*)
ExposureTimeMin
ExposureTimeMax
Description
Function
BU031
8000 [μs]
10 [μs]
16000000 [μs]
BU030C
8000 [μs]
10 [μs]
16000000 [μs]
50 / 76
* initial factory setting
BU080 BU130
25000 [μs] 33333 [μs]
30 [μs] 30 [μs]
BU130C
33333 [μs]
30 [μs]
* initial factory setting
www.toshiba-teli.co.jp
D4213050G