Table of Contents
Advertisement
To access "customer parameters" press "
message shown below will appear on the display:
cUsTomer PArAmeTers
servIce TIme
ITAlIAno
enGlIsh
DeUTsch
FrAncAIs
Pressing the PRG key (29), the following message will appear
on the display:
servIce TIme
DATe AnD TIme
on time
oFF time
Day off
night on
The following service time parameters can be modified:
- ON time (time the machine switches on);
- OFF time (time the machine switches off);
- day off (day on which the enterprise is closed);
- Night ON (start time for evening beverage price: only when
payment system is connected);
- Night OFF (end time for evening beverage price: only when
payment system is connected);
- Wash 1 (request - every 24 hrs - at the programmed hour;
cannot be disabled);
- Wash 2 ÷ 5 (hour of scheduled washes from 2 to 5)
Pressing again the PRG key (29), the following message will
appear on the display:
DATe AnD TIme
year
month
Date
hour
minutes
Use the "+" (30) and "-" (31) keys to move the cursor (black
line) to the entry to be modified, then press the PRG (29) key.
The cursor will turn into an arrow è and it becomes possible
to change the number for the selected entry by using the "+"
(30) and "-" (31) keys.
once the operation is completed, press the RES (24) key or
the OK key (depending of the machine model) to confirm the
data.
note: the cursor changes back to black line.
repeat the operation described above to modify other para-
meters.
4. Service time menu
" key (34); the
+
+
03:00
03:00
none
02:00
+
09
04 APr
15 WeD
17
12
26
General indications
If there is no day off (i.e. the enterprise never closes), enter
"none" for the "day off" item.
enter the same time for the "on time" and "oFF time" param-
eters (for example:
on time
oFF time
"WASH 1" ANd "WASHES 2 ÷ 5"
These are scheduled washes that are independent of the wash
cycles related to the switching on and switching off phases.
At the set hour, the messages "execUTe WAshInG GroUP",
"execUTe WAshInG mIlk cIrcUIT", "execUTe shorT
WAshInG" appear, according to the programmed washing.
After having positioned the cursor on the line to be changed
and after having pressed the PRG (29) key, change the value
using the "+" (30) and "-" (31) keys. Then press the RES
(24) key or the OK key (depending of the machine model) to
confirm the data.
repeat the above operations to change the other wash
scheduling times.
"Wash 1"
When this function is requested, a long wash cycle is performed
(milk circuit and coffee circuit) as described in the "cleaning
operations" paragraph.
noTe: Wash 1 cannot be disabled. It is requested daily at the
programmed hour, and always within 24 hours.
"Washes 2 ÷ 5"
When these functions are requested, they can either be a long or
short wash cycle depending on how they were programmed.
If the set hour for these wash cycles occurs when the machine
is switched off, the request will be canceled.
noTe: set oFF against the time so as to not activate these
wash cycles.
oFF is displayed press the "-" (31) key the indicated time is
"00:00"
For more details, please consult the technical manual at the
"Configuration menu - wash options" paragraph.
22:00
22:00)
Advertisement
Table of Contents
