Table of Contents
Advertisement
Automatic wash (if programmed)
only for machines with cappuccino maker
function - after each milk cycle has terminated, the timer
count-down starts (from 10 to 99 minutes, off disabled
function). at the end, "AUTOMATIC WASHING" appears
on the display, with the time remaining before the wash
cycle begins.
activation - activation is automatic at the end of the
remaining 30" seconds. during this stand-by time:
if the coffee dispensing key is pressed, the timer count-
down will start again from 30" seconds before the end of
the dispensing cycle;
if the milk/cappuccino dispensing key is pressed, the timer
count-down will start from the set up time (10'÷99').
If the (28) key is pressed, the automatic wash cycle will be
performed immediately.
Selection block - always inactive. The wash cycle is
performed even if the user does not intervene.
Wash type - with water, completely automatic.
for more details, please consult the technical manual at the
"Configuration menu - wash options" paragraph.
Washings modality
To be performed at the end of the working day or when re-
quested by the machine.
The machine will issue a message on the display "Execute
washing milk circuit" / "Execute washing group" together with
an acoustic signal.
This will be repeated until the operation is performed or until
the end of the timeout.
When the machine is blocked, and the following message
appears on the display:
***********************
MaChIne loCked
Wash
*******xxxxxx********
note: if no wash cycle messages appear and the machine
is used frequently, the wash cycle can be performed at
any time:
- milk circuit washing cycle: with the modalities
described in "miLK circUit WaSh With LiqUiD
DEtErGEnt";
- short washing cycle: pressing the (26) key;
- coffee circuit washing cycle: with the modalities
described in "GroUp WaSh With DEtErGEnt
taBLEt".
n.B. once the wash cycle is underway, it cannot be
stopped, even if the machine is switched off.
if the power supply goes off or the machine switches off
during the cycle, when the power returns the message
"press WaSh" will appear on the display screen.
to continue, press key (26/28) to complete the cleaning cycle.
Programmed wash cycles that are not effected will be memo-
rized by the machine.
16
When the key corresponding
to the wash requested in the
message (key 26 or key 28), the
wash cycle is activated and the
machine is unblocked.
Advertisement
Table of Contents
