Advertisement
Assembling the
xtracycle swoop
Tools needed
3 mm Allen wrench
4 mm Allen wrench
5 mm Allen wrench
6 mm Allen wrench
Snippers / scissors for cutting zip ties
10 mm socket wrench
Electrical tape
Pedal wrench
Please note: We show the bike being assembled in a
bike stand but the bike can be assembled without one.
If assembling your bike without a stand, be sure the bike
stays upright and is not turned upside down as this can
interfere with the function of the hydraulic brakes.
02
Record the serial number and the Shimano key number
which can be found on the label on the side of the box. Keep
these numbers in a secure place since they might be needed
in case somethig happens to your bike or you lose your
Shimano key. The serial number is the number under the bar
code next to "Frame No:". For the Swoop, this will start with
SWP (the barcode show here is for a Stoker). The key number
is the number under the bar code next to "Key No:".
01 - Open the bike box
Look over the box for signs of shipping damage. If damage
is present, please take pictures in case a shipping damage
report needs to be filed.
03
Cut away the yellow zip ties holding the box closed.
2
Advertisement
