Billion BiPAC 8700NEXL R2 User Manual page 16

PORT
1
Power ON/OFF
2
PWR (Power)
3
Reset
4
USB
5
ETH1/2/3/4
6
Gb EWAN
7
DSL
8
Antennas
WPS /
9
Wi-Fi On/Off
Power ON/OFF switch.
Connect the supplied Power Adapter to this port.
Push and hold the reset button for 5 seconds to restore to
its factory default settings (this is used when you cannot
login to the router, e.g. forgot your password).
Connect to a Printer or USB storage device.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of
the four LAN ports when connecting to a PC or an
office/home network of 10Mbps /100Mbps.
Connect to Fiber/ Cable/ xDSL Modem with a RJ-45 cable,
for broadband connectivity.
Note: Ethernet #5 (EWAN) is a LAN / WAN Configurable Port ; it can
be configured as a WAN Interface for Broadband connectivity
Connect the device to a DSL telephone jack or splitter using a
RJ-11 telephone cable.
Connect to the detachable antennas.
By controlling the pressing time, users can achieve two
different effects:
*
(1) WPS : Press & hold the button for 2 seconds to trigger
WPS function
(2) Wireless ON/OFF button: Press & hold the button for
more than 6 seconds to enable/disable wireless
* For WPS configuration, please refer to the WPS section in the
User Manual.
12
MEANING