Billion BiPAC 8700NEXL R2 User Manual page 30

LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown in
the table.
IPv4
LAN Port
IPv4 address
Subnet Mask
DHCP server function
IP addresses for
distribution to PCs
IPv6
LAN Port
IPv6 address/prefix
DHCP server function
192.168.1.254
255.255.255.0
Enabled
100 IP addresses continuing
from 192.168.1.100 through
192.168.1.199
Default is a link-local address and is
different from each other as MAC
address is different from one to one.
For example
fe80::204:edff:fe01:1/64,
the prefix initiates by fe80::
Enabled
The PPPoE function is
enabled to automatically get
the WAN port configuration
from the ISP.
The PPPoE function is
enabled to automatically get
:
the WAN port configuration
from the ISP.
26
WAN Port
WAN Port