Reducing or enlarging a copy
You can reduce or enlarge copies in three different ways: using preset copy ratios, using custom
copy ratios, or automatically reducing or enlarging an image to fit on the print media size selected.
NOTE
• For legal-size documents, the lowermost section of the document may not be copied.
Using preset copy ratios
Refer to Making copies on p. 5-1 and in step 4, adjust the copy ratio as follows:
1
Press [Enlarge/Reduce].
P R E S E T R A T I O
-
2
Use [2 2
2 ] or [3 3 3
2
• Select from the following:
– <25% MIN.>
– <78% LGL
– <95% A4
– <100%>
– <212% 4" × 6"
– <400% MAX.>
3
Press [Set].
Using custom copy ratios
Refer to Making copies on p. 5-1 and in step 4, adjust the copy ratio as follows:
1
Press [Enlarge/Reduce] twice.
Z O O M 2 5 - 4 0 0 %
-
2
Use the numeric keys to enter a copy ratio between 25% and 400%.
3
Press [Set].
Copying an image to fit the page
If the document to be copied is on paper larger or smaller than the specified print media size
(
p. 3-6), you can automatically reduce or enlarge the image to fit the selected print media size.
NOTE
• You can only use the platen glass with this feature.
Refer to Making copies on p. 5-1 and in step 4, follow this procedure:
1
Press [Enlarge/Reduce] three times.
F I T - T O - P A G E
2
Press [Set].
Chapter 5
1 0 0 %
+
3 ] to select the copy ratio.
LTR>
LTR>
LTR>
1 0 0 %
+
5-3
Copying
5