Loading documents
You can load your document on the platen glass or
the type of document and the machine you are using (
Using the platen glass
NOTE
•
Load legal-size documents in the ADF.
Fax Model
Follow this procedure to load your document on the platen glass:
1
Lift the document cover.
2
Place your document face down on the
platen glass. Align the upper left corner of
your document with the alignment mark on
the upper left corner of the platen glass.
3
Gently lower the document cover.
Using the ADF
Fax Model
NOTE
• For clearer scans, use the platen glass.
Follow this procedure to load your document in the ADF:
1
Check first that there is no document on the
platen glass.
2
Insert the top of your document, face up,
into the ADF until you hear a beep q. Then
adjust the document guides to the width of
the document w.
2-2
Document handling
ADF. Where you load it depends on
Fax Model
p. 2-1).
w
q
Chapter 2