1. Manuals
  2. Brands
  3. Canon Manuals
  4. All in One Printer
  5. MultiPASS MP700
  6. Setup sheet

Canon MultiPASS MP700 Setup Sheet

Canon multipass mp700: install guide
Hide thumbs Also See for MultiPASS MP700:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, User Manual
READ THIS SHEET FIRST
READ THIS SHEET FIRST
Thank you for purchasing the Canon MultiPASS MP700.
To get your machine ready for use, please follow the instructions in this Set-Up Sheet
before referring to any other documentation.
IMPORTANT
Unpack the machine and its components.
Check that you have the following:
Machine
Paper output tray
NOTE
• A printer cable is not included. You must purchase a USB cable (less than 16 # / 8 ft./5 m) to
connect your machine to a computer.
Set-Up Sheet
Set-Up Sheet
• DO NOT assemble the machine or connect the USB cable
before installing the software. You will be instructed when
to assemble and connect the cable.
Multi-purpose tray
Ink tanks
(Black, cyan, magenta, yellow)
Power cord
Documentation
(Set-Up Sheet, Quick Reference Guide)
MultiPASS MP730/700 Setup CD-ROM
Tray cover
Printhead

Advertisement

Table of Contents
loading

Related Manuals for Canon MultiPASS MP700

Summary of Contents for Canon MultiPASS MP700

  • Page 1 Set-Up Sheet READ THIS SHEET FIRST READ THIS SHEET FIRST Thank you for purchasing the Canon MultiPASS MP700. To get your machine ready for use, please follow the instructions in this Set-Up Sheet before referring to any other documentation. • DO NOT assemble the machine or connect the USB cable IMPORTANT before installing the software.

  • Page 2: Install The Software

    NOTE • When installing the software in Windows 2000/XP, you must log on as Administrator or have Administrator privileges. • If you have previously installed an earlier version of the MultiPASS Suite software (version 4.4 or earlier), you must uninstall it before installing this version. For details on uninstalling the software, refer to the documentation of the previous version.

  • Page 3: Assemble The Machine

    In the [MP Setup] screen, click [Install MP Toolbox]. • If you had to restart your computer and Set-up screen is not displayed or you have closed it, on the Windows desktop, double-click [My Computer] (Windows XP: Click [Start], then click [My Computer]). Open the CD-ROM icon, then double-click [setup (setup.exe)].

  • Page 4: Connect The Power Cord

    Connect the power cord. IMPORTANT • Before turning on the power, make sure the document cover A is closed. Plug the power cord into a socket. Load paper. Place a stack of paper (print-side up) in the multi-purpose tray guide A and adjust to the width of the stack w. Then place the tray cover D over the multi-purpose tray e.

  • Page 5: Install The Printhead

    Install the printhead. Press [Open] q and lift up the scanning unit w. Remove the printhead from its packaging, then remove the orange protective cap A. Raise the lock lever C, then gently slide the printhead into the holder. Lower the lock lever. IMPORTANT •...

  • Page 6: Install The Ink Tanks

    Install the ink tanks. Start with the yellow ink tank. Pull the orange tape in the direction of the arrow and remove the plastic wrapper so you can see the air hole A. Turn the ink tank over so that the protective cap B is facing up. Then hold the ink tank as shown below and remove the protective cap B.
  • Page 7 The machine will print a horizontal pattern, and the LCD will display: C H A N G E H V A L U E Column A Value for column A In column A on the printout, note the value of the box with the most solid image. Then use [2] or [3] on the operation panel to select that value.
  • Page 8 CD-ROM. Part no. HT3-2130-000-V.2.0 © 2003 Canon Inc. Canon, MultiPASS, and BCI are trademarks of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice.

Table of Contents