Canon LASER CLASS 730i User Manual page 22

Canon office all-in-one inkjet printer user's guide multipass mp730, multipass mp700
Hide thumbs Also See for LASER CLASS 730i:
Table of Contents

Advertisement

!4 [Scan] key
Scans a document to your computer according to the action selected.
!5 [Photo Print] key
Switches the machine to photo card print mode.
!6 Numeric keys
Enter numerical values as well as
!7
[Tone] key
Fax Model
Switches temporarily to tone dialing.
!8 [Color] key
Sets the machine for color copying and
!9 [Stop/Reset] key
Cancels operations and returns the machine to standby mode.
@0 [Start] key
Starts operations.
@1 [B&W] key
Sets the machine for black & white copying and
@2
[Redial/Pause] key
Fax Model
Redials the last number dialed with the numeric keys. Also enters pauses between or after
numbers when dialing or registering numbers.
@3
[Coded Dial] key
Fax Model
Press this key and a two-digit code to dial a pre-registered fax/telephone number or group.
@4
[Hook] key
Fax Model
Engages or disengages the telephone line.
@5
One-touch speed dialing keys
Fax Model
Dial a pre-registered fax/telephone number or group.
@6 [ON/OFF (1 sec.)] key
Turns the machine on and off (keep pressed for a brief interval). Before turning on the
machine, make sure the document cover is closed.
IMPORTANT
• To prevent the printhead from drying up, the machine automatically caps it when the power is
turned off with the [ON/OFF (1 sec.)] key. If you need to disconnect the machine from the main
power source (e.g. disconnect the power cord), be sure to turn off the machine first by pressing
[ON/OFF (1 sec.)] before disconnecting it.
• If you are not using the machine for a long period of time, we recommend that you print (in black
and color) or clean the printhead approximately once a month to maintain the printhead in good
working condition. The printhead contains high-precision nozzles that will become blocked if the
printhead is not used for a long period of time.
NOTE
• The power cannot be turned off when the machine is operating or
light is on or blinking.
• Your machine performs printhead cleaning every time you turn on the machine. This ensures optimum
print quality, but also consumes a small amount of ink during the cleaning process. For this reason, it is
recommended that you always leave your machine turned on, and only turn it off when instructed to do
so in this guide, or when not using the machine for a long period of time (one month or more). This will
avoid unnecessary ink consumption.
Chapter 1
fax/telephone numbers and characters.
Fax Model
color sending.
Fax Model
black & white sending.
Fax Model
when the In Use/Memory
Fax Model
Introduction
1
1-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents