Copying Problems - Canon LASER CLASS 730i User Manual

Canon office all-in-one inkjet printer user's guide multipass mp730, multipass mp700
Hide thumbs Also See for LASER CLASS 730i:
Table of Contents

Advertisement

The ink empty message is displayed differently on the printer status monitor than
how it is displayed on the machine's LCD.
While you are printing from your computer, if the ink empty message is displayed on the printer
status monitor and on the machine's LCD, press [Resume] on the machine and cancel the job. On
the printer status monitor, the message changes to [Ink low] and you can continue printing for a
short period of time.
However, the ink empty message on the machine's LCD does not change so replace the appropriate
ink tank.

Copying problems

See below if you are having problems copying.
For printing-related problems, see the items marked with
computer, p. 12-2.
Cannot make a copy (the document or paper will not feed into the machine).
1. Is there anything displayed in the LCD?
If nothing is displayed, see p. 12-14.
2. Is the Alarm light blinking?
If it is blinking, see p. 12-18.
3. Is the document loaded correctly?
Check that the document is loaded correctly on the platen glass or
4. See Paper does not feed properly on p. 12-3.
5. Are the ink tanks installed correctly?
Press [Open] and lift up the scanning unit (Printer cover). Press "PUSH" on the tanks and check that
they are securely inserted.
6. Print the nozzle check pattern (
Paper comes out but there is nothing copied on it.
1. Is the document loaded correctly?
If placing the document on the platen glass, the side to be copied should be face down.
placing the document in the ADF, the side to be copied should be face up ( p. 2-2).
2. Has ink run out?
If nothing prints or one of the colors does not print, check if the ink tanks are empty. Replace the ink
tank(s) if necessary. Also, make sure the orange tape has been completely removed from the ink tanks.
3. Print the nozzle check pattern (
Chapter 12
Maintaining the printhead, p. 11-3).
Correct
Tape not removed completely
Remove the tape up to the perforations.
Maintaining the printhead, p. 11-3).
in Problems printing from your
P
Fax Model
ADF (
p. 2-2).
Troubleshooting
Fax Model
If
12
12-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents