Borderless Copying - Canon LASER CLASS 730i User Manual

Borderless copying

This feature allows you to copy colored images that fill the entire page without borders.
NOTE
• You can only use the platen glass with this feature.
• Use specialty papers with this feature (
• You can only use this feature when the print media size setting is set to <LTR>, <4" × 6">, <5" × 7">, or
<A4>. For details on setting the print media size, see p. 3-6. Note that with letter-size paper, a margin may
still appear.
• You can only use this feature when the print media type setting is set to <GLOSSY>, <H.RES.>, or
<PHOTO>. For details on setting the print media type, see p. 3-6.
• You can only copy in color with this feature.
• Since the image is slightly enlarged to fill the entire page when copied, the image will be slightly cropped
at the edges.
• When borderless copying is selected, the LCD will display <100%+>.
Follow this procedure to make a borderless copy:
1
Load the document on the platen glass.
2
Press [Copy].
3
Use the numeric keys to enter the number of copies.
4
Adjust any necessary settings for your document (
• The image quality setting is fixed to <COLOR FINE>. You cannot change this setting.
• You cannot use the [COLOR] or [B&W] key. Copying is fixed to color copying.
5
Press [Menu].
6
Press [Set].
S P E C I A L C O P Y
1 . 2 o n 1
7 2 ] or [3 3 3 2
Use [2 2
8
Press [Set].
• If a print media size setting other than <LTR>, <4" × 6">, <5" × 7">, or <A4> is selected, or if
<PLAIN> or <TRANS.> is selected as the print media type, the LCD will display the following
message:
S I Z E :
T Y P E :
Use [2] or [3] to select either <LTR>, <4" × 6">, <5" × 7">, or <A4>, then press [Set].
Use [2] or [3] to select <PHOTO>, <GLOSSY>, or <H.RES.> as the print media type, then press
[Set].
Chapter 5
p. 3-1).
3 ] to select <BORDERLESS COPY>.
< L T R >
P L A I N
step 4, p. 5-1).
Copying
5
5-5