Fax Only Mode - Canon LASER CLASS 730i User Manual

11
Press [Set] twice.
F / T R I N G T I M E
12
Use [2 2 2 ] or [3 3 3 2
call.
13
Press [Set] twice.
D E F A U L T A C T I O N
14
Use [2 2 2 ] or [3 3 3 2
disconnects the call if no one answers a voice call after the specified time in step 12.
• Select:
– <RECEIVE> to switch to receive mode.
– <DISCONNECT> to disconnect the call.
15
Press [Set].
16
Press [Stop/Reset].
Receiving faxes automatically: FAX ONLY MODE
Choose this mode if:
• you have a dedicated telephone line for fax use only.
• you only want to receive faxes automatically with your machine.
You will need to:
• connect your machine to a dedicated telephone line (
• set <FAX ONLY MODE> (
When you receive a fax call: The machine will receive the fax automatically.
When you receive a voice call: You will not be able to answer the call.
NOTE
• The machine does not ring when it receives a fax call. If you want it to ring, connect a telephone to your
machine and enable the <INCOMING RING> setting ( p. 13-5). You can also select the number of rings
before the machine answers (
Chapter 9
1 5 S E C
3 ] to select the length of time the machine rings when the call is a voice
R E C E I V E
3 ] to select whether the machine switches to receive mode or
p. 9-1).
<RING COUNT>, p. 13-5).
Set-Up Sheet).
Receiving faxes
9
9-3