J-Tech Digital JTD-611V3 User Manual page 10

Displays
3
"No signal"
Transmission
4
distance is
short
Image is
5
not fluid
Can't find
6
the SSID
Can't login to
the Web
7
settings
interface
1. Check the signal source is powered on and
output is normal.
2. Check the signal source output resolution
(ensure it is supported)
3. Make sure the HDMI cable is properly
connected
1. Please adjust the angle of the antenna or
adjust the placement
2. Concrete walls, Brick, Wallpaper, Metal,
Bulletproof glass will shorten the signal cover
range or cause significant signal loss
3. Co-channel interference. Please select a new
channel
1. Please adjust the angle of the antenna or
adjust the placement
2. Co-channel interference. Please select a new
channel
1. Please check the RX and TX power supply
2. Please check whether the Phone/PC supports
5G band
3. Factory default or turn off the power restart
1. Please check the RX and TX power supply
2. Please check the IP type of mobile phone/PC
is Auto (DHCP)
3. Please check the PC's IP is in 192.168.1.
XXX address range
4. Please try logging in with a different web browser
10