Advertisement
7. Connect the 22-way Molex plug on Adapter harness (See Fig. 3) to the
22-way connector on Main Module (See Fig. 4)
Fig. 4
22-way Molex connector
8. Dip switches 1 & 8 must be set "ON" (See Fig. 5) or consult user
manual included with adapter.
Fig. 5
dip-switches
9. Connect the 8-pin DIN to RCA OR 8-pin DIN to 3.5mm cable (See Fig.
6) to the Main Module. (See Fig. 7)
Fig. 6
audio cables
Fig. 7
8-pin DIN input
10. Route the 3.5mm plug to the front of the dash or location where audio
device will reside (within 6 ft.)
Test Operation:
1.
Turn the Radio "ON"
2. Press the "CD" button to enter CD Changer Mode
3. Connect audio device to gray Audio cable (See Fig. 8) or RCA jacks.
Fig. 8
3.5mm plug
4. Search the device for a song and press play.
5. Use radio volume control button to set the playback level.
Warning! Playlist and Track selection is *NOT* possible from the VW
Group radio. You must use the audio devices built-in controls to access
audio files.
6. If correct operation is confirmed go ahead and reinstall Radio
** External or remote CD Changer refers to the optional Changer installed
on the lower dash, center armrest, hatch, trunk etc. (external CD Changer
is not the Changer built-into the head unit)
Advertisement
