Related Manuals for Audi e-tron Sportback (GE) 2020
Summary of Contents for Audi e-tron Sportback (GE) 2020
- Page 1 Service Installation instructions Audi e-tron Sportback (GE) 2020 ► Carrier units for roof rails Scope of delivery 4K4.071.151 Audi Genuine Accessories Edition 01 Service Department. Technical Information...
-
Page 2: Table Of Contents
............... . . All rights reserved. No reproduction without prior agreement from publisher. Copyright © 2019 Audi AG, Ingolstadt Printed in Germany... -
Page 3: Notes
Repairs or the replacement of parts must only be performed by a qualified workshop. It is recom- mended that genuine spare parts available from your Audi partner are used. WARNING All bolted connections and connections for the carrier units and for the roof rack modules must be checked prior to travelling to make sure that they are correctly positioned and installed. -
Page 4: Safety Notes For Loading
Installation instructions - Audi e-tron Sportback (GE) 2020 ► Edition 01 Caution To prevent damage to the vehicle, make sure that the rear lid is opened carefully after longer objects have been loaded onto the vehicle. For vehicles featuring automatic rear lid operation, it is recom- ⇒ ... -
Page 5: Technical Notes
Installation instructions - Audi e-tron Sportback (GE) 2020 ► Edition 01 Technical notes Technical data Dead weight of carrier unit set: approx. 5 kg (11 lbs). Roof load/load To determine the roof load: Weight of the carrier unit + weight of the roof rack module... -
Page 6: Overview Of Components
Installation instructions - Audi e-tron Sportback (GE) 2020 ► Edition 01 Overview of components 1 - Profile cover (2x) 2 - Profile tube (2x) 3 - Upper support brack- et (4x) 4 - Support plate (4x) 5 - Nuts (4x) 6 - Pin link (4x) 7 - Lower support brack- et (4x) 8 - Rubber support (4x) 9 - Screws 2.5 x 11 (8x) - Page 7 Installation instructions - Audi e-tron Sportback (GE) 2020 ► Edition 01 – Fold up the cover flap -13-. – Place the torque wrench -12- on the tensioning bolt -14-. – Loosen tensioning bolt -14- far enough for a certain amount of resistance to be detected.
-
Page 8: Installing The Roof Rack Modules
Installation instructions - Audi e-tron Sportback (GE) 2020 ► Edition 01 WARNING If the carrier units are not checked to make sure that they are secure and to check whether any fasteners need tightening, they could work loose and parts may therefore be lost, despite instal- lation being carried out properly –... -
Page 9: 1.10 Adjusting The Carrier Unit Width
Installation instructions - Audi e-tron Sportback (GE) 2020 ► Edition 01 1.10 Adjusting the carrier unit width WARNING Instructions for the qualified workshop if the position of the support bracket for the relevant vehicle is not set cor- rectly. ⇒ P age 4 –...
Need help?
Do you have a question about the e-tron Sportback (GE) 2020 and is the answer not in the manual?
Questions and answers