Refilling Cooling Water (Mixed With Antifreeze) - MIMAKI JFX550-2513 Operation Manual

Chapter 4 Maintenance
4
Grasp the handle of the waste ink tank and slide out.
5
Attach the cap to the removed waste ink tank, and use tape to prevent leakage of waste ink.
• When disposing of the product, contact an industrial waste disposal operator or dispose of
the product in accordance with the local laws and regulations.
6
Install a new waste ink tank.
7
Close the waste ink tank guard.
8
Touch [Finish] > [End] once replacement is complete.
• The waste ink level will be reset.

Refilling Cooling Water (Mixed With Antifreeze)

The UV-LED unit will become hot with use. Cooling water (mixed with antifreeze) is used to cool this unit.
Once the specified value is reached, "0705 WATER LACK" will appear in SYSTEM ALARM on the touch
panel, and a buzzer will sound. Refill the cooling unit tank with cooling water mixed with antifreeze (1 part
antifreeze to 2 parts water). Filling the tank requires about 500 ml of the antifreeze mixture.
104