Table of Contents
Advertisement
installation
LOG SET INSTALLATION
Read the instructions below carefully and refer to the diagrams. If logs are broken do not use the unit until they are
replaced. Broken logs can interfere with the pilot operation.
The gas log kit contains the following:
a) 02-65
Rear Log
b) 02-56
Middle Left Log
c) 02-44
Front Left Log
d) 02-46
Left Top Log
e) 02-45
Front Right Log
f) 02-47
Center Log
g) 02-48
Middle Right Log
The "02" refer numbers (i.e. 02-65) are
molded into the rear of each log.
1. Carefully remove the logs from the box and unwrap them.
The logs are fragile, handle with care - do not force into
position.
2.
Place Rear Log A on the two pins on the rear log support.
Pins on Rear Log Support
28 |
Regency
U39-11 ULTIMATE™ Freestanding Gas Stove
®
918-039b
LOG SET INSTALLATION
3.
4.
A
Place the Middle Left Log B on the two pins as shown.
Place Front Left Log C onto the 2 front pins as shown.
C
5.
Place the Left Top Log D on the pin on Log B and on top
of the cut-out on Log A.
D
C
U38 / U39
B
A
B
Pin
Cutout
04.05.18
Advertisement
Table of Contents
