Regency U39-NG11 Owners & Installation Manual page 32

installation
6 Place Front Right Log E on the two pins as shown.
7. Place the notch in Center Log F over
Log E and across the cut-out on Log A.
F
8. Position notch in Front Right Log G on Log F and push the
bottom right edge against the bracket on the burner tray.
A
32 |
Regency U39-11 ULTIMATE™ Freestanding Gas Stove
®
919-939
E
A
Notch
Cutout
E
Notch
The bottom right edge of Log G must sit
9. Take the Embaglow, (steel wool like material) lightly separate
it and set a small amount over the visible burner ports in
front and between the front left log and the log under the
"Y" log, indicated in the picture.
IMPORTANT: DO NOT compress this material down on the
burner ports.
E
10. Next, take the white Platinum Ember material (provided)
and gently separate the layers until you have a fi ne layer
to place onto the Embaglow (steel wool type media).
G
E
Side
View
snugly against the bracket
Embaglow
Platinum Embers
Bracket
10.15.18