Table of Contents
Advertisement
operating instructions
Turn on the Appliance
Press the ON/OFF Key on the Transmitter. The Transmitter display will show
all active Icons on the screen. At the same time the Receiver connects the
thermopile to the gas valve millivolt coil and the appliance main burner turns
on. A single "beep" from the Receiver will confirm reception of the command.
Turn off the Appliance
Press the ON/OFF Key on the Transmitter. The Transmitter LCD display will only
show the room temperature and Icon (Fig. 7). At the same time the Receiver
disconnects the thermopile from the gas valve millivolt coil and the appliance
burner turns off. A single "beep" from the Receiver confirms reception of the
command.
Remote Flame Control
The Proflame GTMF has six (6) flame levels. With the system on, and the
flame level at the maximum in the appliance, pressing the Down Arrow Key
once will reduce the flame height by one step until the flame is turned off.
The Up Arrow Key will increase the flame height each time it is pressed. If the
Up Arrow Key is pressed while the system is on but the flame is off, the flame
will come on in the high position. A single "beep" will confirm reception of the
command.
Flame Off
Flame level 5
40 |
Regency
U39-11 ULTIMATE™ Freestanding Gas Stove
®
Flame Level 1
Flame Level Maximum
ROOM THERMOSTAT
(TRANSMITTER OPERATION)
The Remote Control can operate as a room thermostat. The thermostat
can be set to a desired temperature to control the comfort level in a room.
To activate this function, press the Thermostat Key (Fig. 1). The LCD display
on the Transmitter will change to show that the room thermostat is "ON" and
the set temperature is now displayed (Fig. 5). To adjust the set temperature,
press the Up or Down Arrow Keys until the desired set temperature is dis-
played on the LCD screen of the Transmitter.
SET TEMPERATURE
SMART THERMOSTAT
(TRANSMITTER OPERATION)
The Smart Thermostat function adjusts the flame height in accordance to
the difference between the set point temperature and the actual room tem-
peratures. As the room temperature gets closer to the set point the Smart
Function will modulate the flame down. To activate this function, press the
Thermostat Key (Fig. 1) until the word "SMART" appears to the right of the
temperature bulb graphic (Fig. 6). To adjust the set temperature, press the
Up or Down Arrow Keys until the desidered set temperature is displayed on
the LCD screen of the Transmitter (Fig. 7).
Figure 6 - Smart Flame Function
ROOM TEMPERATURE
Figure 5
Figure 7
Advertisement
Table of Contents
