Figure 1-25 Removing The Ilo Manageability Card - HP Integrity rx2600 Upgrade Manual

HP Integrity rx2620 Upgrade
System Hardware Component Upgrade Instructions
Removing the iLO Manageability Card
Step 1. Unscrew the two mounting screws that connect the iLO Manageability card to the internal chassis
post and the two external mounting screws that are located on both sides of the 25-pin serial
connector.

Figure 1-25 Removing the iLO Manageability Card

Rear of Chassis
Step 2. Disconnect the iLO Manageability card connector.
Step 3. Remove the iLO Manageability card from the system by grasping it by its edges.
38
iLO Manageability Card
Chapter 1