Recalling Programs; Editing Programs - Kyocera ECOSYS P4060DN Operation Manual

Operation on the Machine > Program

Recalling Programs

1
2

Editing Programs

You can change program number and program name.
1
2
Recall the program.
1
Select [Program] in the Home screen, or the key of the registered program.
Selecting the key of the registered program will recall the program. If you selected
[Program], proceed to step 1-2.
2
Select the key for the program number you want to recall.
Select [No.] or the Quick No. Search key on the numeric keypad to enter the program
number (01 to 50) directly for recalling.
NOTE
• If the program cannot be recalled, the Document Box or the form overlay specified in
the program might have been deleted. Check the Document Box.
• If the function for printing documents in the Custom Box is registered, the screen for
selecting a document appears. Select a document and then select [OK].
Execute the program.
Press the [Start] key
NOTE
[Program] can be pressed in each function to call up the program registered for the
function.
Display the screen.
1
[Home] key > [Program]
2
Select [Edit].
Edit the program.
1
Select the key(s) corresponding to the program number (01 to 50) to change.
2
Select [Edit] to change the program number and program name.
Registering Programs (page 5-6)
3
[Save] > [Yes]
5-7