Kyocera ECOSYS P4060DN Operation Manual page 258

Setup and Registration (System Menu) > System Menu
Item
WSD Print
Wi-Fi Direct
Wi-Fi
Wired Network
SNMPv1/v2
Wi-Fi Direct
Wi-Fi
Wired Network
SNMPv3
Wi-Fi Direct
Wi-Fi
Wired Network
Enhanced WSD
Wi-Fi Direct
Wi-Fi
Wired Network
Enhanced WSD over SSL
Wi-Fi Direct
Wi-Fi
Wired Network
IPP
Wi-Fi Direct
Wi-Fi
Wired Network
Set whether to use our proprietary web services.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to communicate using SNMP.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to communicate using SNMPv3.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Set whether to use our proprietary web services.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Set whether to use our proprietary web services over SSL.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Selects whether to receive documents using IPP. To use the IPP protocol, set [IPP] to
[On], and set [SSL] to [Off]. In addition, select [Not Secure (IPP&IPPS)] on IPP
Security under Security Settings from the Command Center RX. The default port
*2
number is 631.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
8-39
Description
*2
*2
*2
*2
*1, *2