Kyocera ECOSYS P4060DN Operation Manual page 260

Setup and Registration (System Menu) > System Menu
Item
Enhanced VNC over SSL
Wi-Fi Direct
Wi-Fi
Wired Network
*1 Set "SSL" to [On] in Security Settings.
Security Settings (page 8-41)
*2 The setting will be changed after restarting the device or network.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Security Settings
[System Menu/Counter] key > [System/Network] > [Network] > [Security Settings]
Item
SSL
Proxy
[System Menu/Counter] key > [System/Network] > [Network] > [Proxy]
Item
Proxy
Use the Same Proxy
Server for All
Protocols
Proxy Server (HTTP)
Proxy Server (HTTPS) Set a proxy server (HTTPS). This setup is available when "Use the Same Proxy
Do Not Use Proxy for
Following Domains
This is set when starting up Embedded Web Server RX to use Remote Operation
*1, *2
protected by SSL.
The default port number is 9061.
Value: Off, On
NOTE
• The default setting is [On].
• When selecting [On], it also requires a certificate for SSL. The default certificate is
the self-certificate of the machine.
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to use SSL for communication.
Value: Off, On
Set the proxy for connection to the Internet from an application.
Value: Off, On
Set whether the same proxy server is used for all protocols. To use the same proxy
server, select the [Use the Same Proxy Server for All Protocols] checkbox.
Set a proxy server (HTTP).
Value: (Enter the proxy address and port number.)
Server for All Protocols" is [Off].
Value: (Enter the proxy address and port number.)
Set domains for which no proxy is used.
Value: (Enter the domain name.)
8-41
Description
Description
Description