Kyocera ECOSYS P4060DN Operation Manual page 257

Setup and Registration (System Menu) > System Menu
Item
ThinPrint
Wi-Fi Direct
Wi-Fi
Wired Network
Thin Print over SSL
FTP Server (Reception)
Wi-Fi Direct
Wi-Fi
Wired Network
LPD
Wi-Fi Direct
Wi-Fi
Wired Network
NetBEUI
Wi-Fi Direct
Wi-Fi
Wired Network
Raw
Wi-Fi Direct
Wi-Fi
Wired Network
Select whether to use ThinPrint. To use the Thin Print protocol, set the protocol to
[On]. The default port number is 4000.
Value: Off, On
NOTE
This function is displayed only when the ThinPrint Option is activated.
Set whether to enable this function for each network.
Value: Disable, Enable
To use the Thin Print over SSL protocol, set [Thin Print Over SSL] and [SSL] to [On].
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. The default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Select whether to receive documents using FTP.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Selects whether to receive documents using LPD.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Selects whether to receive documents using NetBEUI.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to receive documents using Raw Port.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
8-38
Description
*1, *2
*2
*2
*2
*2