Kyocera ECOSYS P4060DN Operation Manual page 259

Setup and Registration (System Menu) > System Menu
Item
IPP over SSL
Wi-Fi Direct
Wi-Fi
Wired Network
HTTP
Wi-Fi Direct
Wi-Fi
Wired Network
HTTPS
Wi-Fi Direct
Wi-Fi
Wired Network
LDAP
VNC (RFB)
Wi-Fi Direct
Wi-Fi
Wired Network
VNC (RFB) over SSL
Wi-Fi Direct
Wi-Fi
Wired Network
To use the IPP protocol, set [IPP] and [SSL] to [On]. The default port number is
*1, *2
443.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to communicate using HTTP.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to communicate using HTTPS.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to use LDAP.
Value: Off, On
This is set when starting up a VNC Viewer (E.g. RealVNC) to use the Remote
*1
Operation.
The default port number is 9062.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
This is set when starting up a VNC Viewer (E.g. RealVNC) to use Remote Operation
*1, *2
protected by SSL.
The default port number is 9063.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. The default certificate is the
self-certificate of the machine.
Set whether to enable this function for each network.
Value: Disable, Enable
8-40
Description
*2
*1, *2