Booklet - Kyocera ECOSYS P4060DN Operation Manual

Using Various Functions > Functions
Item
Off
Margin Left/Right
Top/Bottom
Back Page
*2
Centering Centers the original image on the paper.
*1 The input units can be changed in System Menu.
Measurement (page 8-12)
*2 Not displayed when printing from removable memory.

Booklet

Functions
Custom
Box
The Booklet option allows you to produce booklets such as small brochures or pamphlets. A booklet, such as a
magazine, is made by folding at the center.
You can print the cover page onto colored paper or thick paper. Paper for the cover is supplied from the multipurpose
tray. To feed the cover paper from the cassette, refer to the following:
Paper Source for Cover (page 8-11)
NOTE
• The paper sizes supported in Booklet: A3, A4-R, A4, A5, B4, B5-R, B5, Ledger, Letter-R, Letter, Legal, Oficio II and
8K
• Using the optional 4,000-Sheet Finisher and the folding unit enables you to saddle stitch your documents (fold them
in two with staples in the center). Supported paper sizes are A3, A4-R, B4, Ledger, Letter-R, Legal, Oficio II and 8K.
Binding on the left side
Original
Value
Metric: -18 mm to +18 mm
(in 1 mm increments)
Inch: -0.75" to +0.75"
(in 0.01" increments)
Auto, Manual
The folded documents can be read from left to right.
Finished
Set the margin width.
Select [+] or [-] to enter the margins for "Left/
Right" and "Top/Bottom". Select [# Keys] to
use the numeric keys for entry.
For duplex printing, select [Back Page] and
select [Auto] or [Manual].
When [Auto] is selected, an appropriate
margin is applied automatically on the rear
page depending on a margin specified for the
front page and a binding orientation.
When [Manual] is set, you can set a different
margin than the front on the back. Set the
margin in the screen that is displayed. The
setting selections are the same as for the
front.
6-16
Description
*1