Table of Contents
Advertisement
Setup Items in PDL Settings Menu
In the PDL Setting menu, set the parameters for printing.
‹ Available Data Formats
The data formats shown in the following table can be used with this Printer.
Panel Display
D-SCAN
HP-GL
TIFF
CALS
TIP
‘ In this manual, PDL is used as a generic term for all the data formats
‘ For the commands supported by this Printer, see
‹ Automatic Data Format Identification
The Printer has a function that automatically detects and processes the format of
the received data.
With this function, data in different formats are sent to a single channel or port for
printing.
The Printer automatically identifies and processes the received data in the four data
formats: D-SCAN format, HP-GL format, TIFF format, and CALS format.
The following PDL parameters are specified in the PDL Setting menu.
- Paper Parameters
- Drawing Parameters
- Scale Parameters
This is OKI Data Infotech's original D-SCAN format. D-SCAN raster
data is also supported.
This data format is compatible with HP-GL, HP-GL/2, and HP RTL
from HP. (Compatible with HP Designjet 1055CM)
This data format is compatible with TIFF Revision 4.0.
This data format is compatible with CALS Raster Type I.
above.
Appendix.
LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
Data Formats
Command Lists
Chapter
1
Chapter
2
Chapter
3
Chapter
4
in the
Chapter
5
Chapter
6
117
Advertisement
Table of Contents
